Saturday, January 14, 2017

French Seams For the Armhole/Sleeve Junction

I've been asked a number of times how I do a french seam at the armhole of my blouses, so I put together a little tutorial to demonstrate the process. It might sound difficult, but if you can sew a regular french seam you can do an armhole french seam easily.

The NUMBER ONE rule for sewing with french seams is to make sure you are using a somewhat thin fabric. I've attempted them before on fabrics like bottom weight denim and the outcome is bulky and happy-hands-at-home looking.




***Picture order is top left, top right, bottom left, bottom right.***


1. Sew a line of gathering stitches onto the prepared sleeve. I actually like to sew 2 lines with a 4mm stitch length and leave the thread ends long enough to pull.
2. Pull one set of threads to gather the sleeve slightly. You can always gather it more when you get it situated in the sleeve but this gives you a little head start.
3. When I'm sewing french seams that will intersect, I always iron them in different directions. For example, here where the side seam meets the sleeve seam, I've ironed the side seam towards the back and the sleeve seam towards the front. Even in an especially thin fabric, french seams cause some bulk, and ironing them in different directions cuts down on this.
4. Pin the sleeve to the bodice WRONG SIDES TOGETHER. Line up your notches and adjust your gathers. I use long pins so I double insert them for a good grip. Don't cut your long gathering threads yet. The gathers on this sturdy cotton aren't going anywhere but they could slip out in something silky.



5. If possible, adjust your needle position to a little less then .25 inches. A standard seam line is 5/8" so I half that a reduce a little more for turn of cloth. You'll want to line up the right side of the machine foot with the fabric to give you an even line of stitches.
6. Stitch. When you get to the area with the gather, try to smooth out any bumps to avoid puckers.
7. When you get done with the first seam, inspect your work. Any big tucks need to be undone, readjusted and restitched.
8. Press. I pull the sleeve out so that I'm ironing on the front bodice and pressing the seam towards the sleeve. Pull on the sleeve a little to ensure a crisp edge for the second seam.


9. Here's what the first seam should look like when you're done pressing.
10. Trim away about half of this first seam allowance. I always put my hand under the edges being snipped to that I don't catch my bodice fabric on accident.
11. My sleeve is done being trimmed.
12. Turn the garment to the inside and pin for the second seam. Adjust gathering threads if needed. I like to sew this seam with the gathers up so that I can adjust any areas that might need it.


13. Stitch, keeping the needle in the same position as the first seam and aligning the fabric with the right edge.
14. The finished sleeve seam. Inspect for tucks and clip the gathering threads off.
15. Pull the sleeve through the armhole and iron from the inside, pressing the seam towards the sleeve.
16. Done! 

23 comments:

  1. I've done a French seam on the armhole of most of my button up shirts and it comes up real nice.

    ReplyDelete
  2. Thank you Amanda , I've always admired the insides of your garments. This is the one area that lets my garments down but I am going to try this next time.

    ReplyDelete
    Replies
    1. You're welcome Lisa! I hope you find it useful.

      Delete
  3. I have never tried French seams in the armholes but with this tutorial I am ready! Thanks!

    ReplyDelete
    Replies
    1. It really is simple. I'm glad you are ready to give it a try!

      Delete
  4. Can you explain step 5 a little more?

    ReplyDelete
    Replies
    1. I think she meant .25 inches from edge of presser foot. That's a little less than half of 5/8 inch

      Delete
    2. Yes! Sorry! I've corrected it to .25.

      Delete
  5. Thank you, Amanda! I aspire to making garments that look as good as yours.

    ReplyDelete
  6. Great information, thank you! Your garments always look like you could wear them inside out!

    ReplyDelete
  7. Thank you for this. I always struggle with finding a good seam finish for armholes.

    ReplyDelete
  8. Thank you for the clear tutorial and great pictures! I will try this one day! Your garments really do look as good on the inside as they do on the outside. Also, is this a new blog look, or did I just not notice before? I love your picture! :-)

    ReplyDelete
    Replies
    1. I redid it in December - it was time for a change. So you're only a month late in noticing lol.

      Delete
  9. I'm just going to bookmark this and say thank you for the details. And, be thankful you can't see inside my garments.

    ReplyDelete
  10. Thank you! Beautiful finish. I will be pinning this for future use. ♥♥

    ReplyDelete
  11. Thank you.
    What finish do you use when fabric is too thick for French seams?

    ReplyDelete
    Replies
    1. It depends on the garment, but usually I'll overlock it with my sewing machine. :)

      Delete